Hi, We have a new 400m2 dining hall project in Climate zone 1, and would like to seek advice on the compliance for having to meet the maximum 40% for vertical fenestration area as well as not excee

OK, here's my dilemma: Icemakers are covered by Energy Star, but only air-cooled ice makers qualify. On our project, we have a number of Hoshizaki water-cooled icemakers.

Would GBCI approve of the water savings derived from a low-flow aerator (flow limiter) installed on the existing tap that used to have high water flow? Thank you.

The owner of a project is considering the possibility of the project to become LEED Certified.

There seems to be two layers of logic for defining single or mult-occupied space. One is by number of occupants [private office vs. conference rooms] and one is by function [café vs.

Hi, I would like to seek expert advice in the following. 1) Can anybody advise if water-cooled screw chillers intended to operate at non-standard conditions (Middle East) must comply with Table 6.

I am working on a project wehre the offices are bout 140 sq ft, the window is 5'x5' and the VLT is .70...

We have a building that is not pursuing EQ3.1 because they're having trouble getting some tenants who use their own cleaning contractor on board with the building's approach.

I'd like to share a recent reviewer comment. If we had not already achieved more than 60 points, I would have appealed this ruling, but it's not worth my time at this point.

I'm working on a project that is considering using Glidden's IdeaPaint product that is a paint that turns any surface into a dry-erase board.