The way I am interpreting this credit, it would seem that is the project was built post 1994, while a baseline can be calculated, there is no chance of not meeting the PR as long as a satisfactory

We have a project where a sink was added as part of the scope and tied into existing cold and HW supply lines, with no alteration to any other part of the domestic HW system.

Hi: I have a boubt about the water heating equipment to be commissioned.

My understanding is that an extra Regional Priority Credit can be earned on international projects here. Does anyone have any details to the actions required to get this RPC point?

The LEED´s definition of VOC should not be exclude the exempt compounds from the VOC content. However, according to the SCAQMD rules 1113 and 1168, the exempt compounds must be calculated.

Does interior concrete floor stain fall into the Floor Coatings category, with 100 g/L VOC?

I'm working on a project located in high density urban area which means 100% of the site can be built in the ground floor. How do i have to calculate 25% in this case?

Hi, this is a retrofit of an existing building where all the exterior structural walls are being replaced and also the interior walls.

Our project is 750,000 sf office with 1277 occupants. Project is located in Miami and has it's own parking garage.

I have similar concerns as Maria described earlier, and I would really appreciate some advice on how to calculate material costs in a case where a sub-contractor is performing concrete works on-sit