Can a LEED project use exhausted/waste heat (and claim credit of some kind) from an adjacent building that is not being included in LEED project boundary?

We have specified panel sysems for our project which are Greenguard certified. However we are using COM fabric for the panels, that is, we are using fabric from another manufacturer.

Our client is occupying the 8th floor of a G+8 building. The central plant is a combination of Air cooled and water cooled chillers.

We are needing to go down the route of Case 4 where there are facilties in landlors and tenant areas but we can only pursue the WEp1 which is fine.

Hi, I’m currently working on a LEED project in Sweden. In overall we are very good at waste handling, but I think that we include different fractions in hazardous waste.

Page 3 of the ASHRAE Lighting Compliance Documentation has a table for Interior Lighting Compliance Test for Additional Lighting which reads Total Additional Interior Lighting Power Allownace (Watt

Hello. i have a doubt about this credit. We're working on a Children's Museum.

Paints and coatings must meet the VOC limits defined by the SCAQMD Rule 1113 respectively the Green Seal Standards GS-11 and GC-03.

I am part of a new construction supermarket project that intends to seek certification under the LEED NC for Retail rating system.

We are going to build an office space (5000ft2) within an industrial plant and will renovate completely and existing office building attached tho the industrial plant.