Hi, We are working on a luxurious Core & Shell Residential Building. The future tenants will decide on the water fixtures for their own flats/apartments.

I'm not so savvy with how local zoning regs are worded. I did search for my city's local zoning regs and I'm not sure if what I found is it.

Dear all, Should I model non-HVAC pumps such as "sewage submersible pumps" and "domestic water booster pumps" as process equipment? Thanks!

We have a graywater system in our building and I'm wondering if this would be subject to Fundamental Commissioning. Any thoughts?

Our project has green roof around 28,000sqf on the total 68,000 roof area , and 2 row of 2'x2' pavers area (9074sqf )at the roof perimeter.

We are working on an office fit (3,800ft2) made up of basically 2 rooms. There have been some delays and the owner wants to move into one of the rooms while they finish the other.

Hi everyone, i am wondering if we can use the energy prices from the eia.doe.gov (US-Prices) although our project is in Europe? We don´t really understand the Site 273 of the Reference Guide.

How does the line of thought go that balances out not using cooling towers (e.g. air cooled chillers)? Is it bad to not use a cooling tower? is it good? does it balance out in the energy points?

A project we're working on is replacing some of the city sidewalk, which is outside our property line and LEED boundary. Should we include the concrete in our material calculations?

As per WEp1 requirement, the water use baseline is set depending on the year of substantial completion of the building indoor plumbing system.