Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Softwares respecting the Ashrae regulation

NC-v4.1 EAp2:Minimum Energy Performance
posted by  Sam Tognet  on 

Hello everyone,

2
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Mon May 2, 2022, 5:34 pm
Default Avatar

WE Credit 4 requirement question

Healthcare-v4 WEc4:Water metering
posted by  Nate Maniktala  on 

WE credit 4 Water Metering, requires the following. However our building has at most two of the items on the list and the credit requires five.

3
Mon May 2, 2022, 1:52 pm
Default Avatar

Firing Range ventilation process loads

NC-v4 EAp2:Minimum energy performance
posted by  jorge velasco  on 

I am currently working on an energy model for a Firing Range building which will pursue V4 BD+C New Construction.

0
Default Avatar

Offsite Renewable Energy Production

NC-v4 EAc2:Optimize energy performance
posted by  Ricardo Sá  on 

Hi,

1
Mon May 2, 2022, 1:29 pm
Default Avatar

eQuest energy model for CI certification

CS-v4 EAp2:Minimum energy performance
posted by  Mindaugas Mi  on 

Hello, we were asked to add meters for a CI project in our Core and Shell project. We were using eQuest to model the project building.

1
Fri May 6, 2022, 4:29 pm
Default Avatar

Indoor air quality test methods for PM2.5 and PM10

NC-2009 IEQc3.2:Construction IAQ Management Plan—Before Occupancy
posted by  Tyler Zhu  on 

From my understanding, in order to pass the test for PM2.5 and PM10, EPA Compendium Method IP-10 has to be used.

6
Sat Apr 30, 2022, 8:01 pm
Default Avatar

LTc5 - Heat Island Reduction - examplary performance

NC-v4 SSc5:Heat island reduction
posted by  Maria Peralta  on 

Hello, I have a doubt about the examplary performance of this credit.

3
Sat Apr 30, 2022, 4:43 pm

Option 3 without tenant meters

EBOM-v4 EAc4:Optimize energy performance
posted by  Omar Elrawy  on 

Hi All,

We are conducting feasibility study on an existing building in which we are changing chillers. And we are planning to comply under Option 3: Historical Data

0

Option 3 without tenant meters

NC-v4 EAp2:Minimum energy performance
posted by  Omar Elrawy  on 

Hi All,

We are conducting feasibility study on an existing building in which we are changing chillers. And we are planning to comply under Option 3: Historical Data

2
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Fri Apr 29, 2022, 3:02 am

Inclusive Design O&M Training Manual

Pilot-Credits INpc125:Inclusive Design
posted by  Kelli Kimura  on 

Hi everyone,

0