Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
3
Wed Jun 3, 2020, 1:27 pm

Innovation by earning selected credits from other LEED rating system.

NC-v4 INc1:Innovation
posted by  Michael J Turner  on 

In the Innovation credit, the guide says "Points can also be earned by achieving selected credits from other LEED rating systems."

2
Project Director
WSP USA
LEEDuser Basic Member
381 thumbs up
Wed Jun 3, 2020, 4:38 am

Exemplary Performance for Electric Vehicles

NC-v4.1 LTc8:Electric Vehicles
posted by  Michelle Lambert  on 

Is Exemplary Performance available for installing more electric vehicle charging stations than the required 2% in v4.1?

1
Wed Jun 3, 2020, 7:23 pm

Default light reflectance values for commodity materials?

NC-v4 EQc6:Interior lighting
posted by  Joanna Switzer  on 

Curious if anyone has had success claiming some type of Industry cited / average / worst case LRV for surface finishes such as standard poured in place concrete flooring.

 

10
Sustainability Lead
PAE Consulting Engineers
LEEDuser Basic Member
5 thumbs up
Tue Jun 2, 2020, 12:40 pm

Full Occupancy Calculations

EBOM-v4 EQp1:Minimum indoor air quality performance
posted by  Giovani Bernal  on 

Our project is a 24 level office building. At least 75% of occupancy has been reached.

1
Tue Jun 16, 2020, 7:15 pm

Meters for every floor? One Tenant Building

CI-v4.1 EAc3:Advanced Energy Metering
posted by  Susan Di Giulio  on 

In our CI Project, we have a single Tenant.  Per this credit, is a meter required for every floor of this 8 floor building?  We believe that is not required for this CI project.

1
Tue Jun 2, 2020, 12:40 pm
2
Mon Jun 1, 2020, 6:28 pm

PVC Welding Cement

NC-v4 EQc2:Low emitting materials
posted by  Kerry Honsinger  on 

Anyone come up with a PVC Welding Cement that meets the CDPH Standard Method v1.1 -2010 emissions requirement?

5
Mon Jun 1, 2020, 6:14 pm

Building height

Pilot-Credits SSpc55:Bird collision deterrence
posted by  BELEM SALOMON  on 

Hi, all the facade materials comply with the threat factor, so no calculation is needed, however I have two questions: 

0