Leanne Conrad
Project Manager
Entuitive
LEEDuser Basic Member
19 thumbs up
Forum quick links
Forum
Topic
Replies
Recent
Intumescent Paint and General Emission Evaluation requirements
NC-v4 EQc2:Low emitting materialsposted by Michael Munn on
Do the General Emissions criteria for Paints and Coatings apply to intumescent flame retardants for structural elements? We've had difficulty finding products that meet (or report) compliance.
3
Wed Jan 16, 2019, 12:41 am
Enhanced IAQ - EP for 2 strategies under Option 2?
NC-v4 EQc1:Enhanced indoor air quality strategiesposted by Teresa Stern on
We are looking at installing CO2 monitoring at densely occupied spaces. We are also providing a dust collection system monitor and audible alarm at the firing range in a police station.
1
Tue Jan 15, 2019, 11:13 pm
Passing FSC credit to the End User
NC-2009 MRc7:Certified Woodposted by Bobby White on
Our company is working to obtain FSC certification. This is new to us so I'm trying to figure how to pass along the credit percentage.
2
Policy and Standards Manager - Chain of Custody
Forest Stewardship Council US
LEEDuser Expert
14 thumbs up
Tue Jan 15, 2019, 9:54 pm
Does double stacked bicycle racks comply with the credit?
CS-v4 LTc6:Bicycle facilitiesposted by Olga Yuil on
Bicycle racks should reflect best practices in design and installation.
3
Head of Sustainability
Manens S.p.A.
LEEDuser Premium Member
16 thumbs up
Tue Jan 15, 2019, 4:16 pm
Large building with only 3 EV parking spaces and no other parking spaces
NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by Bo White on
Our large classroom building is on a college campus and will only have 3 parking spots total. All 3 will be designated as EV.
3
Senior Project Engineer
NegaWatt Consulting
LEEDuser Basic Member
5 thumbs up
Tue Jan 15, 2019, 1:47 am
Question: Example 1. Residential and nonresidential density calculations (BDC Page 84).
NC-v4 LTc4:Surrounding density and diverse usesposted by Olga Yuil on
Page 84 'FURTHER EXPLANATION' Section Example 1. Residential and nonresidential density calculations from the BDC Reference Guide (Updated August 2018), question:
2
Project Director
Sustainable Design Consulting
LEEDuser Expert
27 thumbs up
Mon Jan 14, 2019, 9:02 pm
final fit-out on tenants request -> designing provisions for negative pressure difficult
NC-v4 EQc1:Enhanced indoor air quality strategiesposted by Mark Kumar Bose on
Hi,
3
Dipl.-Ing., Immobilienökonom (ebs)
Masterplan Informationsmanagement GmbH
LEEDuser Basic Member
0 thumbs up
Mon Jan 14, 2019, 7:56 pm
Using Trane Trace for Solar PV Modeling
NC-2009 EAp2:Minimum Energy Performanceposted by Bo White on
Our building will have on-site (and dedicated campus) solar PV, and we're using Trane's Trace program for our ASHRAE 90.1 energy model.
3
Senior Project Engineer
NegaWatt Consulting
LEEDuser Basic Member
5 thumbs up
Mon Jan 14, 2019, 7:30 pm
Advanced Energy Metering Whole Building Energy Sources
NC-v4 EAc3:Advanced energy meteringposted by susan eguia on
Hi,
We have Fire Station project and submitted Advanced Meter Cutsheet for Electrical.
3
LEED Coordinator/Construction Administrator/Business Development
Building Solutions Group, Inc.
LEEDuser Basic Member
47 thumbs up
Mon Jan 14, 2019, 2:52 pm
Mastersite Calculations
CS-2009 SSc4.2:Alternative Transportation—Bicycle Storage and Changing Roomsposted by Ernst Schriefl on
Hallo,
my project consits of 7 Buildings, whiche are certified under one Mastersite.
Because of this i have serveral questions:
0