Forum quick links
Schools criteria
NC-v4 EQc9:Acoustic performanceposted by Norma Lehman on
Is an academic building on a University campus required to meet the "schools" criteria or is that referencing K-12 only?
Lighting Power Allowance in Landmarked Building
CI-v4 EAp2:Minimum energy performanceposted by Nita Christopher on
We are attempting to certify a small tenant fit out (7,000sf) in a recently awarded LEED v4 EBOM Gold building with Landmark status.
ISO requirements for EPDs
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by Craig Graber on
Hi, this is Rebecca from Atelier Ten.
LEED boundary - urban infill project - LEED V4 C&S
CS-v4 MPR2:Must use reasonable LEED boundariesposted by Thomas Gibbons on
Hi folks,
why only a plan and not a final report after M&V?
NC-2009 EAc5:Measurement and Verificationposted by ANNE JURAN on
To earn this credit all we submit is the plan which basically says we're going to recalibrate and we'll deal with any problems later, right? Is there any backcheck from GBCI on this?
USGBC rainfall events calculator
NC-v4 SSc4:Rainwater managementposted by Leanne Niu on
We could not get the 10 years of the historic daily rainfall data, if we could leave the sheet of historical data blank? and how we calculate the total runoff we need to control on site?&
Carpet Tile as an Entryway System
NC-v4 EQc1:Enhanced indoor air quality strategiesposted by James Keohane on
The Reference Guide for EQc1, Option 1- Entryway Systems describes entryway system in part ..…...
roof definition
NC-v4 SSc5:Heat island reductionposted by Gerren Wagner on
In the LEED certification glossary, a definition for roof is not given. Previously in v3, roof was defined as area covering occupiable space. For a v4 project, could roof areas that cov
software available to analysis LCA
NC-v4 MRc1:Building life-cycle impact reductionposted by Prakash Sekar on
What are the software available to analysis LCA credit
90.1-2010 Minimum Equipment Efficiencies
CS-2009 EAc1:Optimize Energy Performanceposted by Tom Nichols on
I have an interesting situation. I am looking to model a 60 ton (720,000 Btu/hr) WSHP. The tables 6.8.1 in 90.1 do not identify the efficiency ratings for a WSHP in cooling or heating m