Forum quick links
LEED Campus - Knowledge of Future roof replacement to improve SRI
NC-v4 SSc5:Heat island reductionposted by Anastasia Huggins on
We are working on documenting LEED Campus credits for a community college campus consisting of about 20 buildings.
No file uploads?
NC-2009 SSc6.1:Stormwater Design—Quantity Controlposted by Carly Ruggieri on
A recently registered project of mine has the most updated version (5.0) of the credit forms for SSc6.1.
Eligibility for case 1 option 2
NC-2009 SSc6.1:Stormwater Design—Quantity Controlposted by tomaz kipnis on
Hi, The requirements for Option 2 (case 1) of this credit refer to the protection of receiving stream channels.
Third-Party Certification and Labels for CHPS
NC-v4 EQc2:Low emitting materialsposted by Sara Greenwood on
Hello, I am working on a project that would like to use a product that has been tested to Section 01350.
How to use Title 24 2016 to comply with LEED 2009 EAc1
NC-2009 EAc1:Optimize Energy Performanceposted by Bo Yi on
Hi,
I am doing a LEED 2009 project. The project is in California and complied with Title 24 2016. I am trying to use title 24 to comply the LEED EAc 1. I have two questions.
Level 1 vs Level 2 chargers for EVs
NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by Gail Napell on
Has anyone had an issue using one type of charger vs the other on a LEED project?
thanks all!
Purchasing - Lamps as ID credit
EBOM-v4 MRc2:Purchasing - lampsposted by José Solis on
I'm not sure where to post a question about this credit as we are submitting it as an ID credit under Core and Shell v2009. I'm not sure how to proceed.
Does restrooms exhaust can comply with the prerequisite requirements in a residential building?
NC-v4 EQp1:Minimum indoor air quality performanceposted by Felipe Duran on
Dear All,
We are working on a naturally ventilated residential project with 295 dwelling units. The project comply with the monitoring requirements.
Supplementary Cementitious Materials
NC-v4 MRc3:Building product disclosure and optimization - sourcing of raw materialsposted by Megan Leslie on
LEED v4 (as far as I can tell) does not include guidance on Supplementary Cementitious Materials (SCMs), and how to use fly ash to contribute towards MRc3 Option 2. Does anyone out there