Dear Concern:-

Due to an elongated project and construction schedule we'd like to use an alternative compliance path for EAp1 Fundamental Commissioning under LEED NC v2.2.

Is only the portion of a property that is within the 1/4 mile radius calculated, or the entirety property?  I have a few large, low-density parcels that perhaps only about 10% of is

Under several material credits its mentioned that "Procure 20 different permanently installed item from 5 different manufacturer"...for EPD/CSR My question is, 1) To meet the requirement under th

My project will likely reach 20% to 23% Energy Savings. Does this mean I can only score the points after I meet the minimum? In other words is a 20 percent reduction only one credit point?

Dear Concern:-

I see that this has been asked before and there have been LEED Interpretations (10263) on this topic.  But I think they are wrong.  Specifically the ruling that says, "Note that only

We recently received a comment from USGBC LEED that we have to meet ASHRAE 90.1 COP requirement in proposed case energy simulation as well.

In an office building the the public restrooms have two kinds of Dual Flush WC's with different gpf, one WC has 0.79 gpf and the other one has 0.82 gpf.