Forum quick links
Baseline Design Air Flow - System 5
NC-2009 EAp2:Minimum Energy Performanceposted by Vassil Vassilev on
The project we are modeling belongs to System 5. There is however no cooling needed or designed.
The USE of CSI Division
NC-2009 MRc5:Regional Materialsposted by Guillermo Brunzini on
For a project outside of the United States, someone could advise me on the pros and cons of using the CSI Division (optional)?
Thank you!!!
LEED v2009 NC Total Daily Occupancy
NC-2009 PIf3:Occupant and Usage Dataposted by A Commings on
I have a residential dormitory project with some questions on Table Plf3-3 Total Daily Occupancy.
EAp1--Required for Central Plants?
NC-2009 EAp1:Fundamental Commissioning of Building Energy Systemsposted by Neil Sen on
Hello all,
30% fresh air allowance over minimum requirements of ASHRAE Standard 62.1
NC-2009 EAp2:Minimum Energy Performanceposted by Kristof Skawinski on
I strongly question this application of minimum 30% more fresh above ASHRAE Standard 62.1 for buildings in hot and humid climates like Colombo in Sri Lanka where designers on specific project insis
Different lighting levels on daylight sensor or program
NC-v4 SSc6:Light pollution reductionposted by Marilou Communeau on
Hello,
We are considering having the exterior lighting on daylight sensor and also on a management program.
details on load reduction
NC-v4 EAc4:Demand responseposted by Jens Apel on
This project is in an area where no utility provider program is available yet. So preparing the system and a demand reduction plan would earn one point.
Demand Control Ventilation (DCV) Compliance Documentation?
EBOM-2009 IEQp1:Minimum IAQ Performanceposted by Robert Pickering on
We are working on certifying a building that has demand-controlled ventilation (DCV), controlled by CO2 sensors.
Daylight Anaylsis Spreadsheet
NC-2009 IEQc8.1:Daylight and Views—Daylightposted by Casey Kuntz on
Lighting power for outdoor bar
NC-v4 EAp2:Minimum energy performanceposted by Saif Abdulameer on
Hi,