We are working on the energy modeling for Industrial Manufacturing facility in which some places can be classified as “Semi heated spaces” as per ASHRAE 90.1 2007 definition.

We received a declaration from a material producer stating that the product "contains ca. 80% recycled content" and "we assume that 50% comes from post-consumer".

We are working on an art gallery project that has tight environmental requirements within the gallery spaces.

In the school's kitchen we have one separate faucet for washing the dishes (it's not pre-rinse spray, but for full washing) and one for filling the pots.

Greetings, ASHRAE 62.1-2007 establishes a ventilation exhaust rate for garages of 0.7 cfm/sq.ft. Our project has lower rate and besides it applies a CO control settings of 20mg/m3. The question is:

Hello, We are doing precertification but there is no place for Regional Priority, how should we achieve that credit then? Thank you

Greetings, There is a question from the Owner of Data center in respect of the forth comming commissioning process for his project. The question is related to the specific IT equipment and the spec

Greetings, We have a project, which is registered upon LEED-NC v2009, with unit type SI. The online form of EAp2 has a new form, which is directing us to upload the Minimum Energy Performance Calcu

Are CO2 sensors required in locker rooms? Loker rooms are non-regularly occupied spaces but they are also densely-occupied spaces.

My project site is located next to one of the main arteries of Warsaw. Due to the high trafic the strip adjacent to the road is contaminated with petrol related substances (not much but still).