Forum quick links
Mixed feelings about numbering
posted by Andres Schwarz on
I have mixed feelings about this issue.
ESC Plan equivalent
NC-2009 SSp1:Construction Activity Pollution Preventionposted by Vanessa Montezuma Ramos on
Hi, we have some doubts about the equivalency of the ESC plan according to our local standards.
Natural ventilation on a hangar
CS-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by Renato Sandoval on
I am working on a hangar ventilated naturally by a clerestory on the roof top. This project would be applicable to the credit IEQ.c5 ?
Offsite donation compensation
NC-2009 SSc5.1:Site Development—Protect or Restore Habitatposted by Cesar Ruiz on
I have a project with a large previously developed area.
cardboard and paper
EBOM-2009 MRc6:Solid Waste Management—Waste Stream Auditposted by Emmanuel Pauwels on
We are doing a waste audit and we evaluate metals, mixed paper, cardboard, glass, plastics, batteries, and fluorescent lamps.
Sediment trap outside the project boundary
NC-2009 SSp1:Construction Activity Pollution Preventionposted by Gabriela Mesquita on
It plans to build a building in a very broad field of the same owner. The LEED Boundary was defined based on the area that is planned to disrupt.
DCV vs IEQp1
NC-2009 IEQp1:Minimum IAQ Performanceposted by Marina Andrade on
Hi everyone! I have a project that the system works with outside air demand according to the CO2 sensor.
Views
NC-2009 IEQc8.2:Daylight and Views—Viewsposted by Antonio Macedo Filho on
I would like to know if there is a maximum obstruction height of views for option 1.
Eficiency of Electric motors operated with VFD
CS-2009 EAp2:Minimum Energy Performanceposted by Pedro Urazan on
I would like to know if electric motors that are going to be operated by a VFD (Variable Frequency Drive), need to comply with the eficiency requirements of the ASHRAE 90.1 table 10.8. Thanks
Minimun Energy Performance
CI-2009 EAp2:Minimum Energy Performanceposted by sebastian castañeda on
Greetings from Peru I am a student of which I would like to know what to do in the case of minimum energy performance of a commercial interiors when you start from scratch and there is no informat