We are going to apply for 1 point in credit IEQc3.1 but the Contractor is trying to avoid any ventilation during construction: - no natural ventilation - no ventilation by permanent system - no any

Greetings, ASHRAE 62.1-2007 establishes a ventilation exhaust rate for garages of 0.7 cfm/sq.ft. Our project has lower rate and besides it applies a CO control settings of 20mg/m3. The question is:

Greetings, In the design project we are modeling, there are systems which In the Baseline model are to be classified to System 9, System 11 (90.1-3013 for Data Centers) and Parking garage ventilat

Hi, With the new frequency requirement I am not sure how Company shuttles (that are related to set workshifts and which only operate 8 times a day) would fit into this? The shuttle clearly reduces

Greetings, We have a project, which is registered upon LEED-NC v2009, with unit type SI. The online form of EAp2 has a new form, which is directing us to upload the Minimum Energy Performance Calcu

Hello, We are carrying out LEED certification of an office building.

Hi Marcus and colleagues, The project we have to model is a KFC fast food complex, having GFA of 300 m2 single floor. In accordance to App.

We are working on an art gallery project that has tight environmental requirements within the gallery spaces.

Hi, The project has a covered parking. The Owner is chosing the cover material and considers to implement glazing for the cover (SRI value is 30, SHGC is 50).

Markus, thanks a lot for your answer. Another issue appeared to this Heating only system - Baseline modeling of DHW (Domestic Hot Water). The Proposed model is having a gas fired boiler to provide