Post a question or comment
Location Filters
Filter by location
Forum
Topic
Replies
Recent

UL/Ecologo category 2794 for certified disinfectants not listed in the recommended products??

EBOM-v4 EQp3:Green cleaning policy
posted by  Martine Menard  on 

Why is UL/Ecologo category 2794 (for disinfectants) NOT LISTED in the recommended products to be used??? Is this a mistake? enduser is asking to get an approved disinfectant …..help.

1
Tue Jun 11, 2019, 10:36 pm

Metered faucet duration

CS-v4 WEp2:Indoor water use reduction
posted by  Lisa Marshall  on 

Hello, I have received a comment from a reviewer stating we needed to use the a duration of 30 seconds on a metered faucet.  I don't know many people who wash hands for 30 seconds.  What

5
Sustainable Design Lead
CannonDesign
LEEDuser Expert
379 thumbs up
Mon Jun 10, 2019, 11:08 pm

Formaldehyde resins in mineral wool insulation and firesafing

Healthcare-v2009 IEQc4:Low-emitting materials
posted by  Larry Jones  on 

Credit language for IEQc4, Group 4 requires all “Batt insulation products” inside the weatherproofing system to “contain no added formaldehyde, including urea-formaldehyde, phenol formaldehyde and

2
Mon Jun 10, 2019, 8:10 pm

Material Ingredient Optimization & where to find plans & assessments

CI-v4.1 MRc5:Material Ingredients
posted by  Carina Clark  on 

In looking at the new 4.1, where can I look to determine if a products meets either the Action plan, the Advanced screening & assessment, or the Full assessment?

1
Thu Mar 2, 2023, 5:04 pm

VCT floor Polish product that is LEED V4 compliant

NC-v4 EQc2:Low emitting materials
posted by  Andrew Nelch  on 

We are installing Armstrong Bio Based Tile that requires a polish after install. We are looking for a LEED V4 compliant floor polish product that meets the VOC and TVOC requirements.

5
Construction Administrator/ LEED AP
Bywater Woodworks, Inc.
LEEDuser Basic Member
42 thumbs up
Fri Jun 7, 2019, 4:47 pm

Open Aircraft Hangar, No HVAC

NC-v4 EAc2:Optimize energy performance
posted by  Adam Fitzpatrick  on 

We are designing an open aircraft hangar in southern Alabama that will not have any HVAC equipment.  How would we go about pursuing Optimize Energy Performance credits?

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4461 thumbs up
Fri Jun 7, 2019, 4:05 pm

MRc1 Option 3

NC-v4 MRc1:Building life-cycle impact reduction
posted by  Barbara Clarke  on 

We have the calculations sf for our existing exterior enclosure and areas to be reused (excluding windows). How do we calculate the Exterior structure? 

0

Local utility using green power sources

NC-2009 EAc6:Green power
posted by  Emily Purcell  on 

Curious if anyone has submitted this strategy, successfully or not, or has any other insight - I took over this project after construction documentation was finished so I'm not sure what the thinki

3
Sustainable Design Lead
CannonDesign
LEEDuser Expert
379 thumbs up
Thu Jun 6, 2019, 2:31 pm

Renewable Energy Generation

ND-v4 GIBc11:Renewable energy production
posted by  Jeff Forward  on 

This credit requires a certain percentage of renewable energy production capacity relative to annual cost.

1
Thu Jun 6, 2019, 4:08 pm