Post a question or comment
Location Filters
Filter by location
Forum
Topic
Replies
Recent

On-site or off-site separation

Homes-v4 MRc3:Construction waste management
posted by  Amrit Kaur  on 

The credit general requirement requires a percentage of material recycled, and a formal report indicating how much was recycled and to what purpose.

2
Senior Director
Linnean Solutions
LEEDuser Expert
2 thumbs up
Tue Jan 22, 2019, 6:27 am

Option 2 - Excluding Demo

NC-v4 MRc5:Construction and demolition waste management
posted by  Nathan Gauthier  on 

The credit language says "do not generate more than 2.5 pounds of construction waste..." but the example Equation 2 shows "Total construction AND DEMOLITION waste generated..." Has anybody clarifie

17
Default Avatar
Mission Green Buildings
LEEDuser Basic Member
0 thumbs up
Mon Jan 21, 2019, 10:25 pm

Option 2 - Based on GSF, excluding garage area but including garage CDW?

NC-v4 MRc5:Construction and demolition waste management
posted by  Michelle Bombeck  on 

It appears that the for Option 2, teams must calculate the total waste generated for the project which might include construction of a garage or other site feature that would not be included in the

4
Default Avatar
LEEDuser Expert
472 thumbs up
Mon Jan 21, 2019, 10:25 pm

How does EPA Method 24 compare to CDPH Standard Method v1.1-2010?

NC-v4 EQc2:Low-emitting materials
posted by  Summer Gorder  on 

We finally found a Static Control Epoxy Coating for a concrete floor that meets the VOC requirement, although it only References EPA Method 24.

1
Fri Jan 18, 2019, 9:21 pm

Budget Calculation Method - can Option 1 be used for the other categories where all products are compliant

NC-v4 EQc2:Low-emitting materials
posted by  Summer Gorder  on 

I have never had to utilize the Budget Calculation Method for compliance using my GBIM verification system, but have one category that may not comply for a large public project pursuing LEED Platin

0

NC-2009 WEc1 - Water Efficient Landscaping

NC-2009 WEc1:Water efficient landscaping
posted by  ayda nezhad  on 

Hi, 

When we calculate the total irrigation design case(L) , is this volume per month or per day?

0
2
Certification Team Lead
Green Business Certification Inc. (GBCI)
LEEDuser Premium Member
11 thumbs up
Thu Jan 17, 2019, 5:18 pm
3
Sustainable Design Lead
CannonDesign
LEEDuser Expert
379 thumbs up
Thu Jan 17, 2019, 4:38 pm

Surface reflectance of materials and Interior shades and Blinds

NC-v4 EQc7:Daylight
posted by  Kavita Karmarkar  on 

1. Where can I find the surface reflectance values for some common materials like gypsum boards, ACT ceilings etc. I can't seem to find it listed in the product documents from manufacturers.

7
Global Technology Leader of Building Performance
Jacobs
LEEDuser Basic Member
3 thumbs up
Thu Jan 17, 2019, 1:08 am