Can a project split the source of renewable energy used on site between their own on site system and making up the rest through a purchase agreement with a community RES?

Example:

I'm confused as to the wording for solar gardens or community renewable energy systems (off-site): "The system is located with the same utility service area as the facility claiming the use." Does

The illustration used for Strategy A under Guidance for Direct vs Indirect Lighting includes a Luminance diagram with 11,286 cd/m2 at 45 deg. and 0 above this mark.

Has anybody heard of a successful option 4 using zipcar?...I'm concerned about the "use restriction" requirement mentioned in previous comments. Has this ever been achieved?...

I have comingled waste and diverted metals.  One recycler sorts CMU, wood, paper/cardboard and metal off-site and records are kept in CYDs.  The other two recycle centers do Ferrous metal

Hi, 

Our facility was constructed in the center of 96 acres of asphalt. The area had been asphalt for well over 20 years before this.

Hello - I was reviewing the Reference Guide addenda items, and there is one for this credit that just does not make sense.  It is regarding the Required Documentation table, page 439 in the RG

Are existing light fixtures required to be included in the calculations for both options?

Is "v2009v4_Minimum IAQ Performance Calculator_v03" spreadsheet is the correct/right one for a project registered in February 2016 in LEED 2009? Also, Is there any updated "62MZCalc.xls" (Revised A