Forum quick links
Storm water from neighboring site
NC-v4 SSc4:Rainwater managementposted by Bradley Magnusson on
The project I am working on is in a campus setting and the neighboring site's excess runoff is discharged into a storm drain pipe that runs through our project's
Solid Untreated Wood Window Sills
NC-v4 EQc2:Low-emitting materialsposted by Alara Brinton on
We have a project installing solid wood, (untreated) for the window sills & some baseboards.
Using a weighted average to document exemplary performance
NC-2009 SSc7.1:Heat island effect - nonroofposted by Sara Goenner Curlee on
The hardscape for my project is mostly white concrete. However, in some areas the white concrete is edged by colored concrete which has SRI values outside the allowable range.
10% annual building consumption VS 10% of electrical panel's power load
NC-v4 EAc3:Advanced energy meteringposted by Jake Buckmiller on
Hi all,
BUG Rating from similar IES file
NC-v4 SSc6:Light pollution reductionposted by Jake Buckmiller on
Hi all,
LEED EB O+M for just a single Office space in a building
posted by Robert Fernandez on
Is it possible to do a LEED EB O+M certification for a 5000 sq. ft. office within a 350,000 sq. ft building.
partial credit?
CI-v4 IPc1:Integrative processposted by Dana Piper on
If the tenant is remodeling existing space or the move location is predetermined, is it possible to get 1 of 2 points if we start in pre-design and look at energy and plumbing systems?
30% female 70% male for Police facility FTE
NC-v4 MPR3:Must comply with project size requirementsposted by Lawrence Lile on
We are working on a police facility under LEED V4. Currently the department is 12% female. Nationally, police departments, according to a study we will cite, are 14% female. We ar
Switching from Appendix A to Table 6-3 to calculate Ev
CI-2009 IEQp1:Minimum indoor air quality performanceposted by Edgar Arevalo on
I am using an old 62MZ calculator file to do comply with the IEQp1 prerequisite. However, after adjusting the ventilation rates for peak heating mode, Ev cannot be calculated on the spreadshe