Posting here because I'm not sure where else to... 

If a proposed chiller (or boiler) meets the Tables 6.8.1A-J in 2007 or 2010, when tested with water at AHRI conditions but is designed to be used with glycol for freeze protection, then its actual

We have a LEEDv4 CI Commercial Office space where in addition to those already metered, lighting, plug, etc., the other end uses are heating, cooling, and fan energy.

I have a project that is using saguaro ribs as one of its building materials.  Do these ribs count as wood, and therefore need to be included in the total wood cost for MRc7?

Owner wanted all fume hoods operating with 100cfm 24:7.

Hello and thank you ahead of time for your input. 

For Case 1, Type 2, where at least 20% of the system serves non-densely occupied zones, we have a situation where (1) dedicated outside air system (DOAS) serves several smaller heat pump (HP) zones

In this project, we have one office, two plants signed up for LEED Campus.

Our building contains a few million square feet, and while the APPA audit may be time consuming for a building of this size, we believe that it is  worthwhile to pursue as part of our EBO

Is Exfiltration Trench/French Drains a Green Infrastructure Method?