Dear all, I am targeting the Daylight credit by modelling based on Option 2. However, the simulation results show that the illuminance level over the threshold (3,000 lux).

Is there a minimum number of logs required to be submitted to comply with this credit? The project I am handling wishes to install the meter but because of the log requirement, we might need to de

My project has apartments and penthouses on the top. Engineers design VRF with thermostat and residents can control their comfort thermally.

Hi, We are doing core & shell project building structure has ground and 1st level retail shops,2nd to 9th parking 10th to 18th offices and 19th to 20th residential so,there are electrical charg

Dear all, The case 2 calculator has pointed us towards using Case 2 - Option 1 for our Existing Retail Mall project located outside of the US.

In the earlier credit form, we had to enter the total number of showers/ changing rooms in the project.

The "LEED 2009 Global Alternative Compliance Paths Credit Table" (http://bit.ly/2ovIELH) does not include an ACP for C&S MRc6 Certified Wood, but there does exist a pilot for Legal Wood (http:/

Dear LEED, We are trying to achieve points in EAp2 scorecard via Building Simulation Method.

Hi all, We have a question about LEED boundary calculation as below: In order to save the land, our company has set up a shared parking lot in the area, so this project does not have new parking s

Hi, We have project in Pakistan and we had done all measures for LEED certification, but due to some client personal reasons we were not able to register this project with USGBC and now after 1.5