Forum quick links
Transfer Air for IEQp1 achievement
CI-2009 IEQp1:Minimum IAQ Performanceposted by Ricardo Sá on
Hello, I'm currently working on a project of a huge supermarket. The building has warehouses and storage rooms.
Lead-free waterproofing floor slabs
Healthcare-v2009 MRc4.2:PBT source reduction - lead, cadmium and copperposted by VICTOR MORENO on
In LEED Healthcare Reference Guide specifies lead-free roofing and flashing. Is applicable the lead-free for PVC waterproofing floor slabs? I understand that roofing is for roof solutions, no sl
Electric Resistance Heating
CS-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
What are the mandatory provisions for fan coils whose coils are heated through electrical resistances? I think par. 6.4.3.3.1 for the control. Something else?
APPA audits in Europe
EBOM-v4 EQp3:Green cleaning policyposted by Ana Villarroya on
I'm working on a green cleaning policy for a hospitality project.
Baseline heating set-point when no heating system exists
NC-2009 EAp2:Minimum Energy Performanceposted by Ricardo Sá on
According to ASHRAE 90.1 (2007) Table G3.1 - 10 c, "where no heating systems exist, HVAC system shall be assumed to be electric".
Demolished and rebuilt envelope
NC-v4 EAp2:Minimum energy performanceposted by Francesco Passerini on
If the envelope is demolished and then rebuilt with the same shape does Table G3.1 part 5., baseline, point f apply?
Solar Panel Energy Savings
NC-2009 EAc2:On-Site Renewable Energyposted by DILIP bussa on
hello Marcus, i am currently designing a navy lodge and it is 66,420 sq ft.its a Four floor building with 12 guestrooms on each floor about 900 sq.
Airport Terminal LEED certification
Healthcare-v2009 MPR3:Must use a reasonable site boundaryposted by KONSTANTINOS VAVALETSKOS on
In an airport LEED project, only the terminal building is going to be certified. In this case how the LEED Boundary should be defined?
Baseline existing building envelopes
NC-2009 EAp2:Minimum Energy Performanceposted by FABIO VIERO on
Hi, We are currently working on an existing building under major renovation, pursing a LEED certification following NC protocol v.2009.
EN 13779–2007
NC-v4 EQp1:Minimum indoor air quality performanceposted by Francesco Passerini on
We are deciding between the use of EN 15251 and the use of ASHRAE 62.1. Do you have experience in applying EN 13779–2007?