Shall the mandatory efficiency of section 6.4 (Tables 6.8.1) be verified also for a chiller that works as backup system (the chilled water is provided in normal conditions by district cooling)? Be

Hi, we have a project with large waiting rooms: are there specific values for "Reverberation time requirements", as there are not similar room type in the table 2 of reference guide? Thanks

Good morning, We have a wood stair (wooden steps covered with another wood species) that is manufactured by the millwork contractor. The scale is a custom made design.

Is French A+ VOC certification accepted by EQ credit 4.3 compliance?

Can the pressure drop adjustment (e.g. for fully ducted return or for particulate filtration MERV) be applied to System 1?

My question is regarding to operating hours of the building and the Building Operating Plan (BOP).

Does the storage of rain water contribute to achieve this prerequisite? The project will irrigate the outdoor vegetation only with rain water.

In a swimming pool removing latent heat is necessary all the year round. For the baseline model, if I model the heat recovery according to G3.1.2.10 Exhaust Air Energy Recovery (50% both sensible a

For a warehouse, can I deduct the permanently fixed high racking coverage area from the gross floor area, and focus my 75% daylight coverage on the aisles and landing spaces only? I say yes.

Hi, to perform CFD model for IEQc5-LEED Healthcare. What is the size of the model boundary in exterior CFD calculations? That is to say, What area (m2) around the hospital we have to model?. Than