Hello,

I am just starting a new application for a campus project and I have had no previous experience with LEED.

We are working on a project where the selected baseline HVAC system type is 8 with purchased chilled water only from a district cooling plant.

Hello,

Hello,

The LEED guideline states that “Mercury-free lamps, such as LEDs, can be included in the pictogram per lumen-hour calculations only if their energy efficiency levels are equal to or greater than th

What if a roof slab which is covered with an assembly having excellent SRI(>78) & U V values as per  Energy modeling requirement, is covered with an non-compliant material (say grey gra

why is the no information  required to enter in design water calculation to accomodate visitors? 

Please note we have visitor column in calculation sheet.

Our MEP sub-contractor need to clarify if we can use an smoke capsule for duct leakage test, prior to final air leakage test since the project specs is giving a small allowable 1% from basis of des

As per Table 6.8.1D, I observed the following EER = 12.3-(0.213*Cap/1000) EER Also, Cap means the rated cooling capacity of the product in Btu/hr.

Wondering if anyone would have a resource for gypsum board recycling anywhere in Saudi Arabia. Thanks!