Hi, I would like to ask in case that facade manufacturer cannot confirm recycled content in their steel frame of facade, can I use default number 25% recycled content for steel product as stated in

We have a project that is undergoing major renovation and most of the existing plumbing fixtures will me maintained, and their flush and flow rates have been tested under the 0.9 bar municipal-supp

We have an office project that will have some large rainwater collection tanks that will be used for irrigation.

Hi, I am registered for this Pilot Credit.

Dear all experts! I have a high-rise residential building which aim to comply with IEQ pre.1 by combining 2 ways. 1.

Dear all, I would like to use LI ID# 100001163 : "Shuttle buses should provide direct access to transit facilities within 2 miles of the project site, approximately a 5-10 minute drive, and must b

Hi, I have many chilled water pumps, 1 primary and 3 loop secondary pumps with heat exchangers.

Hi, I have an open office, restaurant, apartment for rent in the mixed use building project. Im confused with lighting control mandatory section 9.4 ASHRAE.

I'm just curious if anyone has experience not even achieving the basic 20% reduction with the sanitary ware, but then achieving innovation points on both WEc2 and WEc3 (and of course the regional p

Dear all, We have a project targeting LEED BD+C: Core & Shell. My question is how to model whole-building energy simulation?