Post a question or comment
Location Filters
Filter by location
Forum
Topic
Replies
Recent

UNITS FOR SIMULTANEOUS&INDEPENDENT PRODUCTION OF HOT&COLD Water

CS-v4 EAp2:Minimum energy performance
posted by  Giuseppina Amorusi  on 

Hi all, I'm modeling an HVAC system in Design Builder + Energy Plus that consists in Air handling units and VRV system.

1
Fri Jun 30, 2017, 1:57 pm

n/a

NC-2009 EAp2:Minimum Energy Performance
posted by  Francesco Passerini  on 

G3.1.2.5 states: Ventilation.

1
Fri Jun 3, 2016, 2:49 pm

Demolished and rebuilt envelope

NC-v4 EAp2:Minimum energy performance
posted by  Francesco Passerini  on 

If the envelope is demolished and then rebuilt with the same shape does Table G3.1 part 5., baseline, point f apply?

1
Mon Apr 17, 2017, 2:25 pm

Towers as part of a single building

NC-v4 EAp2:Minimum energy performance
posted by  Francesco Passerini  on 

A building is composed by three towers that have the basement, the ground floor, and the first floor in common. The system for the baseline model shall be System 8.

1
Thu Mar 3, 2016, 3:33 pm

occupation hours for dormitories

NC-2009 EAp2:Minimum Energy Performance
posted by  Francesco Passerini  on 

I’m modelling a student house. In some rooms there is an independent kitchen, while in some other rooms there isn't.

1
Tue Aug 16, 2016, 4:35 pm

Roof area exempt from the SSc7.2 calculation

NC-2009 SSc7.2:Heat Island Effect—Roof
posted by  FABIO VIERO  on 

We have a project with a terrace that is about 50% of the building roof.

1
Fri Nov 27, 2015, 3:07 am

Wood stair

NC-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems
posted by  LEEDme Lorenzi  on 

Good morning, We have a wood stair (wooden steps covered with another wood species) that is manufactured by the millwork contractor. The scale is a custom made design.

1
Mon Jan 4, 2016, 3:53 pm

French A+ VOC certification

NC-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems
posted by  LEEDme Lorenzi  on 

Is French A+ VOC certification accepted by EQ credit 4.3 compliance?

0

Indoor Water Use Reduction_Well water

CS-v4 WEc2:Indoor water use reduction
posted by  Giuseppina Amorusi  on 

Hi everybody, I was envolved in LEED v4 C&S certification. I would know if in Credit Indoor Water Use Reduction it’s possible to consider well water accumulated in water tank as alternative wat

1
Fri Jan 13, 2023, 5:56 pm

EAP2_Humidification Modeling

CS-v4 EAp2:Minimum energy performance
posted by  Giuseppina Amorusi  on 

Hi all, I need to model water humidification section of air handling unit. The software I was using is Design Builder + Energy Plus, that don't have the possibility to insert a water humidifier.

1
Fri Jun 30, 2017, 1:53 pm