I’m modelling a student house. In some rooms there is an independent kitchen, while in some other rooms there isn't.

A building is composed by three towers that have the basement, the ground floor, and the first floor in common. The system for the baseline model shall be System 8.

Is French A+ VOC certification accepted by EQ credit 4.3 compliance?

Hi everybody, I was envolved in LEED v4 C&S certification. I would know if in Credit Indoor Water Use Reduction it’s possible to consider well water accumulated in water tank as alternative wat

Hi all, I need to model water humidification section of air handling unit. The software I was using is Design Builder + Energy Plus, that don't have the possibility to insert a water humidifier.

I'm considering a "Multi-purpose indoor unit for use in 4-pipe systems for the simultaneous production of chilled and hot water by means of two independent water circuits".

We have a project with a terrace that is about 50% of the building roof.

Good morning, We have a wood stair (wooden steps covered with another wood species) that is manufactured by the millwork contractor. The scale is a custom made design.

In a swimming pool removing latent heat is necessary all the year round. For the baseline model, if I model the heat recovery according to G3.1.2.10 Exhaust Air Energy Recovery (50% both sensible a

What are the mandatory provisions for fan coils whose coils are heated through electrical resistances? I think par. 6.4.3.3.1 for the control. Something else?