Forum quick links
Outdoor water use to water mirrors in roof
CS-v4 WEp1:Outdoor water use reductionposted by Tobias Berge on
Is small water mirrors situated at the roof included in the credit? The architect has planned a few water mirrors close to a sky bar.
Which MRT to use
NC-2009 IEQc7.1:Thermal Comfort—Designposted by Jordan Kirrane on
Hi, I have the annual hourly mean radiant temperature results (from the energy model simulation). I'm wondering what MRT you have used in the past if you have all of these figures?
Small entryways
NC-v4 EQc1:Enhanced indoor air quality strategiesposted by Sara Johansson on
Hello, What if a project has small retail stores on the bottom floor, less than 3m long, and the ground outside doesn't belong to the property owner but the municipality (and therefor not possible
Reuse of window glass for contstruction fill
CS-2009 MRc2:Construction Waste Managementposted by Maria Glädt on
We're involved in a Project where the Contractor wants to send the window glass to a facility that crushes the glass.
Option 2 - Leadership Extraction Practices - PEFC wood?
CS-v4 MRc3:Building product disclosure and optimization - sourcing of raw materialsposted by Sara Johansson on
Is PEFC wood under Option 2 - Leadership Extraction Practices accepted?
PPA as renewable energy production?
CS-v4 EAc5:Renewable energy productionposted by Lai-San wong on
Hi! In the requirement for EAc5 (BD+C) it is stated: "The use of solar gardens or community renewable energy systems is allowed if both of the following requirements are met.
Lighting Building Area method
CS-2009 EAp2:Minimum Energy Performanceposted by Pia Öhrling on
If the building is an office building with a small part retail and restaurant how should the areas be calculated for lighting when using the Building Area method?? The space usage types listed in P
Old sheet metal on roof
CS-2009 SSc7.2:Heat Island Effect—Roofposted by Maria Glädt on
Hi! The roof of our renovation project has is made of old sheet metal, which we do not know the SRI of.
Free waste heat
CS-v4 EAp2:Minimum energy performanceposted by sergio arus on
Hi all, We are working in a retrofitting of an existing multi complex building (offices, hotel, retail ) that is planned to be certified as LEED v4 PLATINUM.
Supplementary mechanical ventilation in naturally ventilated
CI-2009 IEQp1:Minimum IAQ Performanceposted by Michael Smithing on
Our project is primarily naturally ventilated and meets the requirements of Section 5.1 in non-core areas.