Post a question or comment
Location Filters
Filter by location
Forum
Topic
Replies
Recent

Tolerance within the achievement of criterias due to different affectations

NC-v4 MPR2:Must use reasonable LEED boundaries
posted by  Audrey LEDESERT  on 

Hi,

I'm working on a project with administration affectation and some commercial surfaces on the groundfloor (surface < 40% of the total project surfaces).

1
Wed Jul 22, 2020, 1:14 am

Renewables outside LPB & owned by Project - Campus or no Campus?

NC-v4 EAc5:Renewable energy production
posted by  Anne Caminade  on 

Hi, We have a new small building on a large industrial site in Switzerland (same owner for the entire site) that we want to certify with LEED Gold (only the new small building) and we have no space

3
Default Avatar
Project Manager
The Green Engineer Inc.
LEEDuser Premium Member
6 thumbs up
Sun Dec 22, 2019, 9:51 pm

Double skin facade

NC-v4 EAp2:Minimum energy performance
posted by  Sarah Leenknegt  on 

Hi

How do I model a naturally ventilated double skin facade in proposed and baseline building?

4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Tue Mar 26, 2019, 7:21 am

Additional requirements - Guarantees of Origin (GOs)

NC-2009 EAc6:Green power
posted by  Jens Apel  on 

The European ACP for EAc6 states: "Guarantees of Origin (GOs) are an acceptable equivalent to the Green-e program for electricity if additional requirements are met with regards to location of powe

3
Mon Feb 19, 2018, 10:29 am

EB O+M recertification after renovation

LEED Rating System Selection
posted by  Michael Grafschmidt  on 

An existing office building, LEED EBOM GOLD certified in 2014, is going to be renovated now.

1
Thu Jan 18, 2018, 4:03 pm

Swiss Reference standard for Primary Energy and GHG

Pilot-Credits EApc95:Alternative Energy Performance Metric
posted by  Susann Geithner  on 

Anyone working on a Swiss project I recommend using SIA380, which list the applicable GHG and primary energy values.

0

German AgBB in LEED version 3 and 4

NC-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems
posted by  Jens Apel  on 

In a LEED v3 project a manufacturer is supplying information that his carpet is complying with AgBB 2015. For LEED v4 this would be sufficient (as far as I know newer standards are accepted).

0

Projects in Europe may use the values defined by EU standards?

CI-2009 WEp1:Water Use Reduction—20% Reduction
posted by  Michael Smithing  on 

Does anyone have any idea what these standards are or where they can be found? The European water label gives its highest rating (Green) to WC taps with a flow of 6 liter/minute or less.

0