we have a project with the main entrance 0.3 miles from 4 public shuttle bus stops that provide express connections to a commuter (and regional, and national!) railway station.

I have a mill-work submittal that requests : LEED Submittals: 1. Product Data showing VOC content does not exceed 30 g/L for wood adhesives and 80 g/L for contact adhesives. 2.

Can you please provide a sample for this, what is required for "The three dimensional orientation of the luminaire (plan/ elevation)"?

When I searched the forum for insight on how to apply/adapt some of the requirements for a campus setting, the posts were from way back in August 2012.

If cooling towers are located offsite at a central utility plant, does the project need to comply with the cooling tower requirements of this prerequisite?

The credit requires "Qualifying transit routes must have paired route service (service in opposite directions)" We have two transit routes that run within the required distance of an entry, but th

have several project and have had to work with the contractors and their LEED coordinator to select a company that is verified for this credit.

Hello all. I notice on LEED Online that there is now an option to register a new project under "Campus" but not under "Block", which USED to be the way to start the registration process for multipl

We are working on a V4 BD+C Healthcare Project, and we're completing the Source Reduction Calculator for the M&R Credit PBT Source Reduction-Mercury.

The project I am working on has a canopy over a terrace, and below the terrace is conditioned space.