My University (12M GSF, 13 divisions, 54 major business units, over 250 major departments), has a multi-use building (287,000) that is undergoing a commercial retail renovation on the ground floor

Hi, I previously filed an innovation credit with my design preliminary submission and received an comment from GBCI therefore it is pending.

Has anyone had comment from GBCI when taking these credits for a speculative C&S office building? We provide a proposed tenant layout that shows the interior complying with these credits.

we have a project with the main entrance 0.3 miles from 4 public shuttle bus stops that provide express connections to a commuter (and regional, and national!) railway station.

I have a mill-work submittal that requests : LEED Submittals: 1. Product Data showing VOC content does not exceed 30 g/L for wood adhesives and 80 g/L for contact adhesives. 2.

Can you please provide a sample for this, what is required for "The three dimensional orientation of the luminaire (plan/ elevation)"?

When I searched the forum for insight on how to apply/adapt some of the requirements for a campus setting, the posts were from way back in August 2012.

If cooling towers are located offsite at a central utility plant, does the project need to comply with the cooling tower requirements of this prerequisite?

The credit requires "Qualifying transit routes must have paired route service (service in opposite directions)" We have two transit routes that run within the required distance of an entry, but th

have several project and have had to work with the contractors and their LEED coordinator to select a company that is verified for this credit.