Sometimes I receive a letter from a manufacturer stating that a material is harvested and manufactured within 500 miles of the project site however for proprietary reasons, they cannot disclose the

Our school project is retaining nearly all of the original plaster ceilings. We are, however, removing the suspended ceilings that were installed in the 1970's, just below the plaster ceilings.

Is all furniture required to be certified or tested? It used to be only permanently installed items, like workstations, private office furniture, task chairs.

I'm a little confused by what we are supposed to show to document compliance for non-occupiable spaces, like restrooms, that the space matrix call out as "N (VRP) / Y (other req's). We have filled

We are working on a 50,000 ft2 medical office building (MOB) that is near a metro rail station. Local codes do not require buildings within 1,000 ft. of a rail station to provide parking.

Are green spec products allowed in place of Energy Star? If you can prove they are equivalent in energy savings?

IF the manufacturer's location is within 500 miles however fabricator's location is not, does it still have contribution to this credit OR not? In another word, when manufacturer location is withi

We are a brand new dairy located in Ohio. We were constructed in 2014 and went online in 2015. In 2014 there were only 3 new dairies built.

Hello All, Our project (zip 54703) just finished final design review and SSc1 was denied which was one of our RP credits as well.

My customer will build a new K-12 school building using LEED V4. We are in the planning stages and they have expressed interest in monitoring-based Cx.