See all forum discussions about Pilot-Credits SSpc55
 Subscribe to new posts about Pilot-Credits SSpc55 Post a new question aboutPilot-Credits SSpc55
See LEEDuser’s guidance on Pilot-Credits SSpc55»

Forum discussion

Pilot-Credits SSpc55:Bird collision deterrence

Documentation Requirements

Hello,

In terms of documenation required to be submitted for this credit, under "Building facade and site features" it reads to include a material list and supporting data for materials with a Threat Factor below 15. Is it necessary to submit manufacturer literature for building materials that would not have a threat factor (i.e., brick, ACM panels, etc)? 

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user sgraham_1
Stephanie Graham
Sustainability Manager
Burns & McDonnell
LEEDuser Basic Member
24 thumbs up

Fri, 11/20/2020 - 19:50

My project is a very simple insulated metal panel system with some daylight glazing on one facade.  I plan to list the few materials we have, identify their threat factors from the Threat Factor Values Sheet and include photos to demonstrate all the exterior building elements.  Though my building is (opaque) insulated metal panel, it has a vertical "noisy" pattern.  The existing glazing has a grid dot transfer that meets one of the specifications for adhesive films for vinyl appliques on existing glazing listed on the Threat Factor Values Sheet, including dot size,pattern spacing and surface.  If I get comments I will post.  I expect to submit for design review before end of the year.

Tue, 03/02/2021 - 22:21

I don't think it's necessary to include building material supporting data for materials with a threat factor of less than 15.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.