See LEEDuser’s guidance on v4 »
Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

The location of Recyclable Storage

CS-v4 MRp1:Storage and collection of recyclables
posted by  SOYOUNG CHO  on 

Hi everyone,

I have a question regarding the location of storage for recyclables under the LEED requirements.

1
Profile picture for user friedhoff
Grace Friedhoff
Sustainability Consultant | Senior Project Manager
Re:Vision Architecture
LEEDuser Premium Member
10 thumbs up
Fri Mar 27, 2026, 5:30 pm
Default Avatar

Composite Panels and TVOC Range

CI-v4 EQc2:Low-emitting materials
posted by  Kenneth Hart  on 

It is clear that LEED v4.0 requires composite wood products to comply with the Composite Wood Evaluation in Table 1.

0
Default Avatar

Exceptional Calculation for Process Loads Without Recent Conventional Practice

NC-v4 EAp2:Minimum energy performance
posted by  Philip Harsh  on 

Hi all,

1
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4460 thumbs up
Wed Mar 25, 2026, 3:45 pm
Default Avatar

Renewable energy for LEED Core and Shell for Data Center

CS-v4 EAc5:Renewable energy production
posted by  Rajat Wadhwa  on 

Hi,

I wanted to clarify how the renewable energy percentage is calculated for Core & Shell projects, specifically for data centers.

1
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4460 thumbs up
Mon Mar 23, 2026, 9:40 pm
Default Avatar

Baseline heating source where no fossil fuel is provided to building

NC-v4 EAp2:Minimum energy performance
posted by  Kevin Gilleran  on 

Hi,

7
Default Avatar
Kevin Gilleran
president
Gilleran Energy Management, Inc.
LEEDuser Premium Member
18 thumbs up
Thu Mar 19, 2026, 10:45 pm
Default Avatar

District Cooling Confirmation for Path 1 & Path 2

CS-v4 EAc2:Optimize energy performance
posted by  Anand k  on 

Hi,

1
Thu Mar 19, 2026, 6:58 pm
Default Avatar

Energy model pump baseline for ultra tall buildings

CI-v4 EAp2:Minimum energy performance
posted by  Samantha Allen  on 

Has anyone run up against issues in energy modelling for spaces in ultra tall buildings? LEED baseline in IES 6x lower than the actual for the building.

1
Thu Mar 19, 2026, 6:32 pm
Default Avatar

Strategy for Project surrounded by Active Non-LEED Construction & Dirt Roads

NC-v4 SSp1:Construction activity pollution prevention
posted by  A&L SUSTENTABILIDADE   on 

I am looking for advice on best strategy to comply with this prerequisite, since it's a unique site condition.

1
Default Avatar
A&L SUSTENTABILIDADE
LEEDuser Premium Member
1 thumbs up
Fri Mar 13, 2026, 6:57 pm

Interpretation MPR1 - existing land

NC-v4 MPR1:Must be in a permanent location on existing land
posted by  Jos Schild  on 

The explanation for MPR 1, contains additional information regarding 'existing land': "Buildings located on previously constructed docks, piers, jetties, infill, and other manufactured structures i

1
Profile picture for user tristanroberts
Tristan Roberts
Founder & Community Director
Metricorps
LEEDuser Expert
7781 thumbs up
Fri Mar 13, 2026, 3:51 pm
Default Avatar

G3.1.1 exception d exhaust hood airflow baseline

NC-v4 EAp2:Minimum energy performance
posted by  Junaid Mujahid  on 

Hi All,

3
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4460 thumbs up
Wed Mar 11, 2026, 2:36 pm