See LEEDuser’s guidance on v4 »
Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Schedule for Lighting, Occupancy, & Plug Loads

NC-v4 EAp2:Minimum energy performance
posted by  junaid naseer  on 

We are working on a Hospital Project outside USA and we are going though option 1 i.e. whole building energy simulation.

5
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4460 thumbs up
Thu Aug 28, 2025, 4:38 pm
Default Avatar

According to ASHRAE 90.1, Is it mandatory to install occuppant sensors in electrical and mechanical rooms?

NC-v4 EAp2:Minimum energy performance
posted by  Sara BENLOUBA  on 

According to ASHRAE 90.1 / Section 9.4.1.2 , Do we have to install occupant sensor or a timer switch in electrical and mechanical rooms? 

 

Thanks, 

5
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4460 thumbs up
Thu Aug 28, 2025, 12:50 pm

Clarification on "Size Category (Input)" in ASHRAE 90.1-2010 Table 7.8

NC-v4 EAp2:Minimum energy performance
posted by  Anurag Ghosh  on 

Hi everyone,

2
Profile picture for user anuragg
Anurag Ghosh
Assistant Sustainability Manager
L&T Construction
LEEDuser Basic Member
2 thumbs up
Wed Aug 27, 2025, 1:55 pm
Default Avatar

Contact Adhesives - Testing conducted for "Open Plan Office Environment"

NC-v4 EQc2:Low-emitting materials
posted by  Sean Smith  on 

I'm looking for a contact adhesive for a client and I can't seem to find any complaint product with CDPH testing that is tested to the private office scenario.

0

eQuest for international projects - Default climate data and other pre-installed databases missing

CS-v4 EAp2:Minimum energy performance
posted by  Marine Petrosyan  on 

Hi All!

1
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4460 thumbs up
Thu Aug 21, 2025, 2:27 pm

LTc Bicycle Facilities Vincinity Map

NC-v4 LTc6:Bicycle facilities
posted by  Theresa Lehman  on 

I am working on a project seeking LEED certification located in a small rural community.

0
Default Avatar

IEQ PreReq - Carbon monoxide monitoring

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Kim C  on 

The pre-requisite criteria speaks of having Carbon monoxide monitors installed in each dwelling unit. 

6
Default Avatar
Junaid Mujahid
Sustainability Engineer
PNC Architects (Sobha Realty)
LEEDuser Basic Member
2 thumbs up
Tue Aug 19, 2025, 7:57 am
Default Avatar

CO concentration (ppm) thresholds for alarms in dwelling units

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Junaid Mujahid  on 

Hi Everyone,

0
Default Avatar

EQpc123 Designing with nature

CS-v4 INc1:Innovation
posted by  Triple Green Building Group  on 

I have been documenting this as an innovation for a long time, but now attempt it as a pilot credit for a first time due to the requirement to have at least one pilot credit for the total 5 points.

0

Client wants to move to USGBC Approved Template instead of sharing via Energy Star Portfolio Manager after LEED Certification

NC-v4 EAp3:Building-level energy metering
posted by  Edgar Arevalo  on 

I ran into a bit of a pickle.

2
Profile picture for user earevalo
Edgar Arevalo
Energy Engineer
ads ENGINEERS, DPC
LEEDuser Basic Member
21 thumbs up
Wed Aug 13, 2025, 3:45 pm