Forum quick links
Waste generated outside LEED boundary
NC-v4 MRc5:Construction and demolition waste managementposted by Cindy Quinn on
Does anyone have experience with construction waste generated outside of a project's LEED boundary? We have project that is owned by the city, who is also the waste hauler. The city is
University Campus - Area outside LPB designated as "preserved and protected" greenfield or restored area allowed?
NC-v4 SSc2:Site development - protect or restore habitatposted by Erica Downs on
Does anyone know if, on a University Campus, the owner is still allowed to designate the equivalent required area as "protected for the life of the building" somewhere outside the LPB?
Waste category as "construction & Demolition waste"
NC-v4 MRp2:Construction and demolition waste management planningposted by Adam Insan on
One of project located in KSA following construction waste management credit targeting 2 points with 75% diversion as per option 2.
Multitenant Building
EBOM-v4 MPR2:Must use reasonable LEED boundariesposted by Sofia Barahona on
We are currently carrying out the feasibility study for the certification of an existing project in Operation and Maintenance v4.1: Existing Buildings.
Lighting Boundary if property boundary abuts parking spaces off of a public roadway?
NC-v4 SSc6:Light pollution reductionposted by Crista Shopis on
Hi, my project abuts a parking lot that is basically an expanded shoulder with spaces, directly off of a roadway.
Contaminated Soil
NC-v4 MRp2:Construction and demolition waste management planningposted by Magdalena Kolodziej Rivas on
If a project has a small area of contaminated soil, how should that be incorporated into the Waste Management and Erosion and Sedimentation Plan.
LCA: is waste % required?
NC-v4 MRc1:Building life-cycle impact reductionposted by Alexandra Kravel on
I'm curious if % of materials waste is typically included in the LEED LCA analysis? Not seeing a specific language for it on the LEED guide.
What happened to VOC content?
Mid-Rise-v4 EQc7:Low-emitting productsposted by Michelle Rosenberger on
In the 2008 MFMR system, VOC content was under the material credit Environmentally Preferred Products. Now in v4 there is Low Emitting but it doesn't include VOC content just emissions.
Modeling Process Hot water
NC-v4 EAp2:Minimum energy performanceposted by Rajat Wadhwa on
Hi, I am working on a test and reliability manufacturing facility, where we are using close to 65,000 gals of water for process load, what should be a good assumption to figure out how much of that