Two project engineers have completed the sign-off task, but a 3rd has been unable to use LEED ON-LINE despite my efforts to provide remote assistance.

Our mechanical engneer/energy modeler just contacted me to ask about a discrepancy in our square footages from what we have entered on PIf2 on LEED Online, and what he has input in the energy model

I've got a project where nearly nothing has changed between tenants.

I've been provided with a light inventory for our building and so know what type of light I'm looking for (e.g. 18W F840). I've also found the Philips, GE and Sylvania LEED-EB calculators.

Due to the nature of a treatment plant it requires the building to be operating before the treatment plant is functional. Is there any requirement for a maximum of time before the treatment plant

I see where EPEAT is listed as a resource in the LEED guide but where in the guidance does it say that EPEAT-rated electronics comply with the sustainable purchasing criteria?

Is it safe to say that if a project acjhieves 60% improvement over ASHRAE 62.1 outdoor air ventilation rate that the project would be likely to receive an innovation credit if applied for?

Does anyone know how the baseline Lighting Power Density should be set up if the space type is not listed on Table 9.6.1 of ASHRAE 90.1 using Space-by-space method?

I´m trying to set how many RECs I must buy to comply with this credit for a project of 59,545sqf.

I am wondering if it's possible to sequence the flush out in stages so that you can make your way through the building, but also maintain work in other parts as well...