Does the SF6 (Sulphur Hexafluoride) insulating gas used to quench the arc in electrical power equipment (MV switchgears) need to be taken into consideration under the EAc4?

I have a LEED for Schools project where we have site contamination from an old gas station leaky storage tank.

Numerous CIR responses and LEED Interpretations previously denied the credit where fan coil units recirculating room air for supplemental cooling in high load spaces were equipped with MERV 8 filte

the project is an office building development, the project proponent would like to leave the feasiblity of installing carpet to the tenants thus the floor will be concrete finish with raised floor

I'm working on a preschool project, which will have 30 babies between 4 months to 1 year-old; 30 babies between 1 to 2 years-old; 30 babies between 2 - 3 years-old; and 30 babies between 3 to 4 yea

We are contemplating the use of a rubber walk-off mat for a high traffic area at a winter resort with lots of snow.

Hi, We purchased a Kenmore Refrigerator for our new office, which is pursuing LEED CI, and instead of it having an Energy Star sticker, it says it is EEV Rated.

Is it possible to achieve these simultaneously? One appears to require manual control and the other, auto control.

so my CI LEED project boundary is half of one floor of an 8 story building, it's 14,000 square feet, and does include an exterior courtyard.

Our building has existing MERV 8. The existing HVAC does not have the capability to to take MERV-13 filters. Can we get this credit if we have phase-out plan or need to replace all at once?