Forum quick links
Entering nonregularrly occuoied spaces in IEQp1 calculator
NC-v4 EAp2:Minimum energy performanceposted by Vassil Vassilev on
Greetings, In the IEQp1 calculation form, provided by USGBC for using in LEED v4, in the Occupancy Category pull-down menu, there is nothing related to equipment rooms, non-occupied stores and sim
Automatic metered urinals
CS-2009 WEp1:Water Use Reductionposted by Ward Miller on
Metered showers and faucets appear to be rather clear based on the available LEED information and the new Water Use Reduction Calculator, but metered urinals appear to be overlooked.
System 9 - Baseline
NC-2009 EAp2:Minimum Energy Performanceposted by Vassil Vassilev on
Greetings, The question is related to modeling rooms/zones which are to be assigned to System 9. In the Proposed, these rooms/zones are having supply, return and sometime room exhaust ventilation.
Living/Green Walls
CS-v4 SSc3:Open spaceposted by Ward Miller on
Has anyone tried using the area of a green wall to achieve the 25% vegetated space portion of this open space requirement?
ASHRAE 90.1-2007, 6.5.3.1.1,exception b
NC-2009 EAp2:Minimum Energy Performanceposted by Vassil Vassilev on
Greetings, According to ASHRAE 90.1-2007, 6.5.3.1.1,exception b, individual exhaust fans with motor nameplate kW of 0.75 kW or less could be excluded when estimating Fan system power limitation. Th
Misc. loads entry in the simulation software
NC-2009 EAp2:Minimum Energy Performanceposted by Vassil Vassilev on
Greetings, Regarding Misc.
Fan Power and Fan Power Adjustment (FPA)
NC-2009 EAp2:Minimum Energy Performanceposted by Vassil Vassilev on
Greetings, In the project we are modeling, the following issues are still not quite clear for us and we'd appreciate any advice on the matter. Baseline system is 8.
Wood pellets as a Renewable energy source
NC-2009 EAc2:On-Site Renewable Energyposted by Vassil Vassilev on
We are at conceptual design stage for a new school building.
Service Hot Water & Heat recovery condensers
NC-2009 EAp2:Minimum Energy Performanceposted by Vassil Vassilev on
Greetings, In the project we are modeling, the Proposed design has applied a chiller’s condenser heat recovery without this to be required by the prescriptive requirement (6.5.6.2).
Baseline System 8
NC-2009 EAp2:Minimum Energy Performanceposted by Vassil Vassilev on
Greetings, Just a small clarification about the heating plant of System 8. It is written that heating is Electric resistance.